Drivers Wireless Data Device USB Devices



-->

This topic describes the device-specific registry entries.

It’s fairly straightforward to set up Xiaomi USB drivers, simply find and select your device model number and tap “Download”. Now extract the download file and then set up the drivers. Together with USB Drivers installed Windows and Mac, users have the choice to move files & files effortlessly from smartphone to PC and vice-versa.

Install Universal Serial Bus controllers driver in Compatibility mode; Run the Hardware and Devices Troubleshooter. In the following contents, we will introduce them one by one. Solution 1: Reinstall the Universal Serial Bus Controllers Driver. A driver issue can be the reason for USB devices disconnecting and reconnecting Windows 10. Update The MTP USB Driver: One of the major reason that Windows is unable to recognize the Android device is the corrupted USB driver. To install or update the MTP USB driver, just follow the steps mentioned below: Firstly, Press Windows Key + R to give a run command, type devmgmt.msc and click on the Ok button to open the Device Manager directly. 0x01: Forces the USB driver stack to ignore the serial number of the device. Therefore, the device instance is tied to the port to which the device is attached. Supported on Windows Vista and later versions. Indicates whether the USB driver stack must reset the device when the port resumes from a sleep cycle.

Make Usb Device Wireless

Devices

Find device information after it enumerates on Windows

View the device interface GUID, Hardware Id, and device class information about your device

  1. Find this registry key and note the DeviceInstance value:

    HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlDeviceClasses

  2. Find the device instance registry key and get the device interface GUID:

    HKEY_LOCAL_MACHINESYSTEMCurrentControlSetEnumUSB<hardware id><instance id>Device Parameters

  3. Under the device instance key, note the device class, subclass, and protocol codes:

    HKEY_LOCAL_MACHINESYSTEMCurrentControlSetEnumUSB

Registry settings for configuring USB driver stack behavior

The registry entries described in this topic are found under this key:

In the vvvvpppprrrrr key,

  • vvvv is a 4-digit hexadecimal number that identifies the vendor
  • pppp is a 4-digit hexadecimal number that identifies the product
  • rrrr is a 4-digit hexadecimal number that contains the revision number of the device.

The vendor ID, product ID, and revision number values are obtained from the USB device descriptor.The following table describes the possible registry entries for the vvvvpppprrrrr key. The USB driver stack considers these entries as read-only values.

Drivers Wireless Data Device Usb Devices Dongle

Registry entryDescriptionPossible values

osvc

REG_BINARY

Supported on Windows XP and later versions.

Indicates whether the operating system queried the device for Microsoft-Defined USB Descriptors. If the previously-attempted OS descriptor query was successful, the value contains the vendor code from the OS string descriptor.

  • 0x0000: The device did not provide a valid response to the Microsoft OS string descriptor request.

  • 0x01xx: The device provided a valid response to the Microsoft OS string descriptor request, where xx is the bVendorCode contained in the response.

IgnoreHWSerNum

REG_BINARY

Supported on Windows Vista and later versions.

Indicates whether the USB driver stack must ignore the serial number of the device.

  • 0x00: The setting is disabled.

  • 0x01: Forces the USB driver stack to ignore the serial number of the device. Therefore, the device instance is tied to the port to which the device is attached.

ResetOnResume

REG_BINARY

Supported on Windows Vista and later versions.

Indicates whether the USB driver stack must reset the device when the port resumes from a sleep cycle.

  • 0x0000: The setting is disabled.

  • 0x0001: Forces the USB driver stack to reset a device on port resume.

Drivers Wireless Data Device USB Devices

Related topics